1. Home
  2. News Releases
  3. 2010
  4. Naming Ceremony Held for the New Module Carrier Equipped with an Innovative Air-Lubrication System
 
 

Naming Ceremony Held for the New Module Carrier Equipped with an Innovative Air-Lubrication System

March 26, 2010


Left to right: Kazuo Soma, General Manager of Nagasaki Shipyard & Machinery Works,
Mitsubishi Heavey Industries, Ltd. and his wife,
Yasuo Tanaka, NYK Corporate Officer,
Kazunari Sakou, Senior Managing Director of NYK-HINODE Line, Ltd.,
Sumio Kinoshita, president of NYK-HINODE Line, Ltd.,
Shinji Kobayashi, NYK vice-president and his wife,
Shiro Iijima, Director, executive vice-president of Mitsubishi Heavey Industries, Ltd.
and his wife,
Kunifumi Hashimoto, Deputy General Manager of Nagasaki Shipyard & Machinery
Works, Mitsubishi Heavey Industries, Ltd.

On March 25, a naming ceremony was held at the Koyagi Plant of Mitsubishi Heavy Industries’ Nagasaki Shipyard & Machinery Works for a newly built module carrier* for the NYK Group company, NYK-Hinode Line Ltd. At the ceremony, NYK vice-president Shinji Kobayashi named the ship YAMATAI, and his wife cut the ceremonial rope holding the vessel in place. Shiro Iijima, director, executive vice-president of Mitsubishi Heavy Industries Ltd., and Sumio Kinoshita, president of NYK-Hinode Line Ltd., were also in attendance.

 
YAMATAI has been equipped with an innovative air-lubrication system that will generate bubbles by supplying air to the vessel bottom, thus reducing the frictional resistance between the vessel’s bottom and the seawater. The system is expected to result in 10 percent less CO2 emissions from the vessel.
 
YAMATAI will be the first vessel engaged in overseas transport to make use of a permanently installed air-lubrication system using an air-blower**. The ship is set to be completed on March 31, 2010.
 
Vessel Particulars
Length Overall: 162.00 meters
Breadth: 38.00 meters
Draft (design): 6.344 meters
Gross Tonnage: 14,538 tons
Deadweight Tonnage: 19,500 tons
Shipbuilder: Koyagi Plant of Mitsubishi Heavy Industries’ Nagasaki Shipyard & Machinery Works
 
* Special heavy load carrier with roll-on, roll-off rampway to transport thousand-ton prefabricated structures of plant facilities to be installed on oil/gas development sites, or industrial locations.
** Announced on February 24.2010. For more information, please see the company’s website:
https://www.nyk.com/english/release/788/NE_100224.html
The news on this website is as of the date announced and may change without notice.